LED T8 UL Type A

9W/12W/18W

Energy saving with low power consumption
Perfect retrofit fluorescent T8 in Instant Start circuit
Compatible with most common Instant Start electronic ballasts (Refer to the ballast compatibility list)
Smooth operation even at low temperatures
No mercury and hazardous substances
Full glass body
Voltage: 120Vac, 50/60Hz, Power Factor: 0.9
Good color rendition, Ra ≥80

Dimensions

Circuits

Home

Office

Shopping mall

Hotel

Supermarket

Restaurant

Parking

School

Warehouse

Factory

Hospital

Gallery

Museum

Airport

Station

Electrical
Rated Wattage [W]	9W / 12W / 18W
Rated Voltage [V/Hz]	120Vac, 50/60Hz
Power Factor @120V	0.9
Input Current [mA] @120V	83 / 111 / 167
Model
LED F9T8/8XX/G/NA/IS/24	9W
LED F12T8/8XX/G/NA/IS/36	12W
LED F18T8/8XX/G/NA/IS/48	18W
Luminous Flux [lm]
9W	1400lm @3000K/3500K/4000K/5000K
12W	1650lm @3000K/3500K/4000K/5000K
18W	2600lm @3000K/3500K/4000K/5000K
Performance
SDCM	<6
Estimated Yearly Energy Cost [$USD]	1.08 / 1.45 / 2.17
Luminous Efficacy [lm/W]	138-156
Color Rendering Index [Ra]	≥80
Color Maintenance [hr]	>6000
Luminous Intensity Distribution [°]	220
Life [Yrs] (based on 3hrs/day)	46
Lumen Maintenance at 6000hrs	>0.8
Rapid Cycle Stress	>15,000 cycles
Start Time [sec]	<0.5
LED Failure	<5%
Ballast Factor	0.88
Mechanical
Diameter D [in]	Φ1.16
Length L [in]	23.7 / 35.4 / 47.7
Material	Glass
Standard Compliance
ANSI	UL8750, UL1993, UL1598, UL1598c, C82.77-2002, C78.377-2008
FCC	FCC CFR Part 15, FCC CFR Part 18
Mercury Content [mg]	0.0
Other
Dimmable [Yes/Only with specific dimmers/No]	No
Operation Temperature	-20°C ~ 50°C
Storage Temperature	-10°C ~ 30°C